| All the drivers are recessed. The enclosure itself is 1/4"
thicker than the plans. I laminated a 1/4" sheet of plywood to the
back of the front baffle to hold the t-nuts. I then glued the t-nuts in
so they can't fall out or spin easily. |
The front isn't buffed as high gloss as the top and sides
are. I didn't want to much reflection from the pront projector. |
 |
 |
 |
 |
| It weights 55lbs with everything in it. |
But it has to be re-done anyway. See the white spots on the
front right top corner - yes it slipped and a couple choice words came out. |
| How's it sound? Well after only 2 hours of use it's great.
Very seemless w/ the 281s.Quite a bit of bass too for a center. |
Here's my new Adire Kit281s.
1" wider than normal to accomodate the rounded edges.
|
 |
 |
 |
Why they unfinished? I'm not sure how to finish
them just yet to go w the new home theater. I like the look of the rounded
corners better than the square ones like below. |
| |
| |
| Here's just some other stuff I've built for
friends and customers. |
|
My 85L 12" Shiva, 15" PR
|
Here's a tan 85L Adire 12" Shiva w/ 15" Adire PR I build for
a friend. He wanted the tan sandstone look to match his beige house. He
hates the looks of the grills but he was worried one if his kids would
put a hole in the drivers.
|
|
Adire Kit 281s finished in white oak and finished with a satin poly.
|
Dayton DVC Sub
|
|
|
 |
Custom sub - Figured cherry veneer with 5 coats of clear
shellac.  |
Pair of 1cu subs. Unfinished, cherry veneer
|
|
|
 |
|
|
The Patented OctoSub.
142L Adire 15" Tempest built for a customer in NY.
Smaller versions available - see www.acoustic-visions.com
for details.
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
